Tag Archives: HDR

High Dynamic Range Photography/Photogrammetry – Part 1

High Dynamic Range (HDR) Photography

High Dynamic Range is a popular photographic technique that is used to produce more realistic photographic results or artistic images. It is a technique that can be used to try and replicate what the human eye can see as the dynamic range of a camera is limited and it is unable to record the lightest and darkest elements in a single photograph. This can be remedied by taking a number of photographs with varying shutter speed/aperture combinations and combining them using specialist software to produce a photograph with a greater dynamic range than can be recorded in a single photograph.

Many new digital cameras have the ability to produce HDR photographs using Auto Exposure Bracketing (AEB), special HDR settings (this may process the images for you resulting in an HDR photo on the camera but losing the originals) or manually setting the camera up.

Limitations of archaeological and cultural heritage photography

An intrinsic problem with taking photographs in archaeological and cultural heritage contexts is lighting; both too much and too little lighting are factors that hamper recording images that include as much detail as possible.

In the case of archaeological excavations attempts have been made to limit the problems in section photography by either reflecting more light in using white card or using a tarpaulin to cast a shadow. Both of these techniques work but require time and manpower.

The same problem is encountered in building recording where in an outside environment strong lighting can cause both bleached out areas and heavy shadows.

Netley Abbey - East Window

Netley Abbey, Hampshire – East Window. Photograph demonstrating the problem of strong oblique lighting causing both too much and too little light in the same image.

While lighting through windows can cause similar problems on the inside of buildings.

Netley Abbey, Hampshire - Sacristy/Library.

Netley Abbey, Hampshire – Sacristy/Library. Photograph demonstrating the effect of excessive light coming through a window causing the dual problems of both too much light near to the window and too little light in other areas.

In order to reveal elements in dark shadow a high exposure camera setting is required, while bright bleached out areas are only revealed with low exposures. These elements together with well lit areas cannot by revealed in one single photograph, this is where High Dynamic Range photography comes in.

HDR Photography in Archaeology

HDR Photography was introduced to Archaeology by David Wheatley in 2010, he provided examples of its use in improving the standard recording methods of excavations, cave sites and even using archived analogue archaeological photographs. Sadly its use was not embraced by the community probably due to technological limitations at the time and the inherent conservatism of the industry and museum archives which were yet to embrace digital photographic technology. Technology and the industry have now caught up with his ideas, with digital cameras being present on most if not all excavations, while other scholars have now begun to bring the technology to the technique of 3D recording using photogrammetry.

HDR Field Archaeology Photography

Photography is one of the primary recording techniques within field archaeology and has been since the introduction of discipline, but conservatism within field archaeology has meant that it was only fairly recently that digital photography became the primary recording technology.

Digital cameras have a number of benefits within archaeology:

  • The ability to take numerous photographs on one memory card.
  • No need to pay to process films.
  • No need to digitize the photographs.
  • Where once excavators may have been told to limit the number of photographs taken on an excavation to keep the processing costs down, digital media allows almost limitless photographs to be taken.
  • Photographs can be as easy as point and click with the camera controlling all of the settings.

But they also have drawbacks:

  • Where once archaeologists knew how to use an analogue camera to take bracketed shots, the automatic setting on digital cameras is commonly the only setting used as it produces results at a required level of quality, this means that the archaeologist may not know how to properly operate the camera.
  • Although almost limitless photographs can be taken, limits should be included as the archive may still need to be sorted through.
  • The requirements for digital storage can be complicated and costly.

Although not ideal, a number of modern cameras now come with an HDR setting on them which in many cases can be changed to the required level of bracketing, although only the merged photograph is saved losing the possibility of later re-processing the photographs with different settings.

Field Archaeology Archive Photographs

One benefit of traditional bracketing of analogue photographs for archaeological excavations is that they provide an ideal resource for conducting HDR processing. These archives have multiple photographs at different exposure levels which can be digitized and processed to provide better results than the originals and be re-entered into the archive with the digitized originals.

HDR using archive slides from excavations at the Cove, Avebury using archive slides (Wheatley 2010)

HDR using archive slides from excavations at the Cove, Avebury (Wheatley 2010)

HDR Building Photography

Building recording is an area that can be significantly enhanced by the use of HDR. It is difficult to provide adequate lighting in many cases, meaning that some areas are brightly illuminated while others are dimly lit loosing information in both cases.

Processing bracketed images into an HDR image provides a greatly enhanced image.

HDR Photogrammetry

Recent developments in camera technology, HDR software and photogrammetry software have allowed the introduction of HDR Photogrammetry. Thanks to the additional information present in the photographs models of higher detail and accuracy can be created in non-optimal lighting conditions.

As well as the ability to use tone mapped images produced from HDR images the Agisoft PhotoScan Photogrammetry software can also process .exr file format High Dynamic Range images into 3D models.

HDR Object Photogrammetry

One area under study is its use in photographing objects. The benefits are determined by the type of material used, some are greatly enhanced by HDR while others are little altered.

Image matching result from the images originated with different HDR processing: a) No HDR; b) tone mapped images from HDR processing (Guidi et al 2014)

Image matching result from the images originated
with different HDR processing: a) No HDR; b) tone mapped
images from HDR processing (Guidi et al 2014)

HDR Building Photogrammetry

We have already seen the benefits of HDR Photography in building recording and this can continue with photogrammetry.

Netley-Window-PG

Photogrammetry point cloud of the east window of Netley Abbey, Hampshire showing how the raking sunlight on the left-hand side of the window has bleached out the photographs and lost detail

Both the increased level of quality of the photograph and the higher amount of detail present in the 3D model can easily be seen in the HDR photogrammetry model.

Software Solutions

A number of software solutions are available for the processing of HDR photographs, these range from high end photographic software such as Adobe Photoshop and Lightroom, through to HDR specific pieces of software and even open source solutions. HDRSoft’s Photomatrix comes in a number of versions which include plugins for different software packages such as Adobe Lightroom, Photoshop Elements, Photoshop and Apple Aperture. With low cost solutions such as Fusion HDR or free open-source solutions such as LuminanceHDR also being available.

In order to be view-able on low contrast monitors and paper the images need to go through a process called tone mapping, this replicates the appearance of the high dynamic range photograph on these media.

Downloaded imaged can be batch processed in software such as Photomatrix setting up how many images need to be merged together with a number of preset or custom settings allowing the images to be processed exactly as required. These pieces of software can also compensate for slight movement between the recording of the multiple images. The resulting images can then be saved as either .hdr (Radiance) or .exr (OpenEXR) file formats which record the HDR information.

Batch processing of images within Photomatrix

Batch processing of images within Photomatrix

Benefits
HDR photography can record more information in both photographs and photogrammetry models. By using open Source HDR software it can be free. Many cameras allow multiple bracketed photographs to be be taken automatically only adding a few seconds to the recording process.

It is also possible in some of the software to open a folder full of images and have the software batch process it without any user intervention once the preset settings have been loaded.

Drawbacks
Among the drawbacks are the fact that as the camera is taking multiple photographs it is difficult to stabilize the camera by hand, otherwise there will be movement between the photographs. Although movement between photographs can be corrected if you are bracketing shots and using software the automatic HDR setting on the camera will probably result in a blurry image.

UAV HDR Photogrammetry

UAV HDR Photogrammetry is an area I will be studying in the future. It has great potential for recording but will require a careful balance of UAV hovering, a steady gimbal, fast shutter speed and an adequate depth of field. It will be discussed in a future blog.

Sources
Guidi, G., S. Gonizzi, and L. L. Micoli. “Image pre-processing for optimizing automated photogrammetry performances.” ISPRS Annals of The Photogrammetry, Remote Sensing and Spatial Information Sciences 2.5 (2014): 145-152.

Kontogianni, G., and A. Georgopoulos. “Investigating the effect of HDR images for the 3D documentation of cultural heritage.” World Cultural Heritage Conference 2014 – Euromed 2014 – International Conference on Cultural Heritage Documentation, Preservation and Protection. (2014)

Ntregkaa, A., A. Georgopoulosa, and M. Santana Quinterob. “Photogrammetric Exploitation of HDR Images for Cultural Heritage Documentation.” ISPRS Annals of the Photogrammetry, Remote Sensing and Spatial Information Sciences 5 (2013): W1.

Wheatley, D. “High dynamic range imaging for archaeological recording.” Journal of Archaeological Method and Theory 18, no. 3 (2011): 256-271.

Advertisements

UAV (Unmanned Aerial Vehicle) Archaeological and Cultural Heritage Recording

Introduction

Recent developments in a number of technical areas has allowed the development of battery powered UAV (Unmanned Aerial Vehicles) systems which has allowed recording technologies to become airborne easily with extensive control over what is being recorded.

Many of these low cost UAV solution come ready to fly out of the box with some even coming with a camera. These systems have allowed archaeology and cultural heritage to be recorded in whole new innovative ways.

There are basically two types of UAV systems that are employed, each with their benefits and drawbacks:

  • Fixed wing systems use less power and can spend longer flying, but don’t have the ability to hover in one place or change direction quickly. They are also designed for mapping so carry cameras that only point downwards.
    The 3DRobitics Aero-M fixed-wing drone

    The 3DRobitics Aero-M fixed-wing drone

  • Multi-rotor systems use more power as their multiple rotors are turning all of the time they are in the air, so they can spend less time flying and recording. They have the ability to hover and change direction and altitude quickly.
    X8-M

    The 3DRobotics X8-M hexacopter

Recent developments have seen UAVs which combine the two systems, such as the SkyProwler Kickstarter Project. This is a system that can be fixed wing, fixed wing with rotors or just rotors. The rotors are retractable which can be deployed when required while in the fixed wing configuration.

Krossblade SkyProwler

Krossblade SkyProwler

UAV Technological developments

A number of technological developments have led to the recent proliferation of UAV systems being used in different industries and hobbies.

Batteries

The development of the LiPo (Lithium Polymer) battery brought a number of improvements over the previous NiMH (Nickel-metal hydride) battery technology used in Radio Control (RC) Vehicles. They:

  • Have a larger capacity and last longer.
  • Are more powerful.
  • Are smaller and lighter.
  • Are cheaper.

This means that a UAV system can fly for longer, further and faster with a battery that weighs less.

Brushless Motors

The brushless motor has taken over from the brushed motor in the RC (Radio Control) industry with their:

  • Superior power.
  • Higher efficiency.
  • Greater reliability.
  • Higher accuracy.
  • Reduced noise.
  • Lower susceptibility to mechanical wear.
  • Longer lifetime.
  • Smaller size.

A brushed motor works by controlling the polarity of an electromagnet (coil of wires) between two magnets of different poles. The brushes in the brushed motor carry the electric current to the armature (electromagnet) of the motor by being in constant contact with it as it rotates. This causes wear to the brushes and at higher speeds friction, reducing torque and creating heat.

The brushed motor works in the opposite way, by having the coils of wire on the outside, with the magnet in the middle. It removes the need of the brushes but complicates the process as the position of the rotor needs to be sensed and the coils controlled in phase by an electronic speed controller (ESC). Although they are mechanically more complicated and cost more than brushed motors, their other benefits outweigh those of the brushed motor.

Brushed and brushless motors (http://www.eskyhelicopters.com/)

Brushed and brushless motors (http://www.eskyhelicopters.com/)

Brushless Gimbal

Linked intrinsically with the Brushless Motor is the Brushless Gimbal, this is a system which both; holds a camera steadily and level in a single position while the UAV moves around it thereby removing camera shake, and it also can be panned up and down and side to side in more expensive systems.

Camera gimbal pitch, yaw and roll. (http://science.howstuffworks.com/)

Camera gimbal pitch, yaw and roll. (http://science.howstuffworks.com/)

UAV brushless camera gimbals come in two types:

  1. 2-axis. This has two brushless motors which control the camera pitch and roll. This system relies upon filming in the direction that the UAV is pointing and is generally available on the cheaper UAV systems. These have legs which would be in the way if the camera was able to yaw.

    DJI Zenmuse H3-2D Gimbal

    DJI Zenmuse H3-2D Gimbal

  2. 3-axis. This has three brushless motors which control the camera pitch, yaw and roll. This allows cinematography to be conducted from UAV platform with the movement of the camera almost completely removed from the movement of the UAV. And in many cases a separate person can control the camera. These more expensive systems generally have retractable legs allowing the camera to pan left and right.

    DJI Zenmuse Z15-5D III (HD) Gimbal

    DJI Zenmuse Z15-5D III (HD) Gimbal

Gimbals can also be constructed using technology and how-to guides readily available on the internet. A number of Brushless Gimbal Controler Boards are available (including the V3 Martinez Board) as well as gimbal kits and brushless motors.

V3 Martinez Brushless Gimbal Controller Board

V3 Martinez Brushless Gimbal Controller Board

GPS (Global Positioning System)

GPS has a number of applications within the UAV industry:

  1. It is used to make flight easier by using the GPS signal to hold the UAV in one place by calculating if it is moving.
  2. It can be used together with an autopilot to automatically control the flight path of the system.
  3. The GPS co-ordinates at which each photograph is taken can be used within photogrammetry software to help with the locating and aligning of the photographs.
3DR uBlox GPS with Compass

3DR uBlox GPS with Compass

Mast

Mast

The GoPro

The lightweight GoPro series of camera was another enabling factor in the development of the UAV market. Many UAVs are in fact developed with the GoPro camera in mind. Not only are the GoPro series of cameras a lightweight powerful system but they also have wireless communication allowing the camera to be controlled, and the display to be viewed remotely.

Although there are now a number of different sports cameras the majority of low cost UAV systems, particularly those on the Kickstarter and Indiegogo crowdfunding platforms are designed with carrying the GoPro in mind.

Autopilot Systems

Autopilot systems can be very beneficial in the recording of different aspects of Archaeology and Cultural Heritage.

  • They can be used to plan a flight path for the UAV to take over the subject matter.
  • They can be used to create a grid pattern flight path as part of a mapping operation.
Mission Planner

Setting a flight path within Autopilot software

3DRobotics

3DRobtics is a personal drone manufacturing company which also manufactures open source autopilot systems that are the most popular in the world. They are used on many of the Kickstarter systems available.

The company produce two Autopilot systems:

  • The APM 2.6 System is based on the Arduino micro controller. It includes a 3-axis gyro, 6 DoF (Degree of Freedom) accelerometer, high-performance barometric pressure sensor and automatic datalogging.

    APM 2.6 Autopilot

    APM 2.6 Autopilot

  • The Pixhawk is an advanced autopilot system designed by the PX4 open-hardware project and manufactured by 3D Robotics, it includes a 3-axis 16-bit gyroscope, 3-axis 14-bit accelerometer/magnetometer, 3-axis accelerometer/gyroscope and a barometer. A digital airspeed sensor and GPS and compass can be purchased with the system and plugged into the Pixhawk board.

    Pixhawk Autopilot

    Pixhawk Autopilot

NAVIO

The NAVIO is an Indigogo project to build a Raspberry Pi based autopilot which attaches to the top of the credit-card sized computer allowing the construction and control of a UAV system with the powerful small computer system.

NAVIO Autopilot

NAVIO Autopilot

Follow Me Technology

A recently developed technology which is becoming increasingly popular in the drone industry is the ‘Follow Me’ technology where the drone will follow some sort of controller, whether a mobile phone / tablet / laptop or a specially designed piece of technology such as the AirLeash which comes with the AirDog drone. These systems use autopilots systems combined with GPS technology in the controller to control the direction and speed of the UAV system.

The ‘Follow Me’ technology is designed for the extreme sports industry where the drone can follow the user, filming as it flies, whether they are on a motorbike/mountain bike, surf board or other sports equipment. As well as controlling the flight path of the drone following the user it also controls the gimbal that holds the camera keeping the user in shot at all times. In some systems a number of pre-determined video filming techniques are made available with the control app which add to the abilities of the system.

Within Archaeology and Cultural Heritage the system has the potential for filming site tours, where the person giving the tour is tracked by the ‘Follow Me’ system, they would also have a digital audio recording system attached to them to record the dialogue which could be matched with the video in post-production. It would allow one person to do all of the production of the video.

Object tracking and following

Object tracking and following is an expansion of the ‘Follow Me’ technology where rather than following a GPS enabled device an object is selected within an interface and the system visually tracks the object. The UAV follows the tracked object with the camera being locked onto it.

Shift

The Shift has been developed by Perceptiv Labs, it attaches to existing UAV systems, such as those designed by DJI and 3DRobotics, as well as custom systems created with a number of different flight control systems and autopilot systems.

shift

Shift Object Tracking System

Shift Object Tracking System

Through the use of a Shift Eye video camera (attached to the camera of the UAV system) and a Shift Processor computer which plugs into the autopilot it provides standard UAV systems with the ability to track up to four subjects and follow and record them in flight. The subjects are selected using an app available on Android devices.

shift3

shift4

This could add to the site tours potential of the ‘Follow Me’ technology by selection the tour guide within the app when they are walking around, then also selecting the area under study when appropriate. This would be done best by having a second person controlling the app by watching the video, selecting the areas of interest when required and moving back to the tour guide when needed.

Autonomous

Development in autonomous flight of UAVs has a number of benefits for recording where a UAV could record the progress of an excavation at intervals, or record a standing building without any need for control by the pilot.

A number of simple autonomous technologies have already been integrated within commercial UAV technology.

Ultrasonic distance sensors

Ultrasonic distance sensors calculate distance by sending an ultrasonic wave and calculating the time it takes to receive the wave back.

MB1240 XL-MaxSonar®-EZ4™ High Performance Ultrasonic Range Finder

MB1240 XL-MaxSonar®-EZ4™ High Performance Ultrasonic Range Finder

They can be used in obstacle avoidance systems for UAVs, with the ultrasonic beam bouncing off objects in the UAVs path. The ultrasonic sensor is attached to the autopilot which can alter the path of the UAV when an obstacle is detected. With the APM autopilot the sensor it is enabled and calibrated within the Mission Planner Software.

Sonar_Setup

Optical Flow Technology

Optical flow technology is a technique where multiple images from a sensor are compared to determine movement, recent developments in technology mean that this can now be done in real time. It can be used in combination with Autopilot systems to stabilise the flight position of a UAV by detecting movement between photograph and altering the flight accordingly.

The PlexiDrone Indiegogo crowfunding project even comes with the technology demonstrating the growing availability and cheapness of the technology.

The PlexiDrone Indiegogo crowfunding project even comes with the technology demonstrating the growing availability and cheapness of the technology.

The Parrot Bebop Drone comes with Optical Flow Technology integrated into its design (8), with an image of the ground being taken every 16 milliseconds and then compared with the previous one.

Plexidrone

Plexidrone

The PlexiDrone Indiegogo crowfunding project also comes with the technology demonstrating the growing availability and cheapness of the technology in crowdfunding projects.

As well as being integrated into in some UAV technology the sensors themselves can be purchased separately; in UAV technology they come in two distinct types:

    • Mouse Based. The mouse based sensor is based upon the technology of optical computer mice.
3DRobotics Optical Flow Sensor Board with ADNS3080 mouse sensor

3DRobotics Optical Flow Sensor Board with ADNS3080 mouse sensor

  • CMOS Based. The CMOS based sensor uses a CMOS camera chip to capture the images.
    PX4FLOW KIT with MT9V034 machine vision CMOS sensor with global shutter

    3DRobotics PX4FLOW KIT with MT9V034 machine vision CMOS sensor with global shutter

    Vision Positioning System

    The Vision Positioning System present in the DJI Inspire 1 uses a combination of Ultrasonic sensors and Optical Flow Technology to control the position of the UAV in environments where GPS signals cannot reach. It can hold its position and stop when the RC controls are released.

    DJI Inspire 1 Vision Positioning System – [1] Two sonar sensors [2] One binocular camera.

    DJI Inspire 1 Vision Positioning System – [1] Two sonar sensors [2] One binocular camera.

    Intel RealSense

    The Intel RealSense is a new depth-capturing camera technology designed to be incorporated into the latest laptop and tablet technology. It has the ability, thanks to its specialised lens array, to alter the focus of photographs after they have been taken, like the Lytro Illum. It can also track hand gestures to control the computer systems and 3D scan real world objects.

    The new Astech Trinity Autopilot system incorporates 6 Intel RealSense cameras enabling 360˚ motion capture and obstacle avoidance . 
    The Astech Trinity Autopilot will be incorporated into the AscTec Firefly later this year.

    Asctec  Trinity

    Asctec Trinity Autopilot – http://www.theverge.com/

    Swarm Technology

    A lot of technical development has gone into the idea of drone swarms where multiples drones fly together in cooperation. Amongst the applications considered for their use are search and rescue, crop pollination, surveillance, monitoring traffic and as a distributed computing and communications network in disaster areas. Work at the GRASP (General Robotics, Automation, Sensing & Perception) Lab at the University of Pennsylvania has included navigating obstacles, Simultaneous Localization and Mapping (SLAM) using a Microsoft Kinnect and Laser Rangefinder, flying formation by monitoring each other’s position and co-operation in building structures.

    Within Archaeological and Cultural Heritage recording this has the potential for a swarm of UAVs to record areas in co-operation reducing the time taken, as well as the potential of using different technologies to record at the same time.

    Recording Technologies

    Introduction

    A UAV can act as a platform for a number of different recording technologies that can be employed in the recording of Archaeology and Cultural Heritage.

    Photogrammetry

    Photogrammetry is a technique for taking measurements from photographs and can be used to create a number of different results.

    The type of camera system used depends on the type of UAV system employed, the more powerful the system the heavier and more powerful the camera that it can carry.

    Weight is an important consideration; cheaper UAV systems are designed to only carry the GoPro or another extreme sports camera. While the more expensive/powerful systems can carry higher powered digital SLR cameras which record in much higher levels of detail and without lens distortion. The better quality the camera the more details are recorded.

    A number of 360° camera systems have been released which can be attached to the bottom of UAV systems. These have the potential to record many more photos than a single camera, this could potentially speed up photogramemtric recording as well as providing immersive experiences using VR (Virtual Reality) technology such as the Oculus Rift.

    360Heros 360° GoPro mount

    360Heros 360° GoPro mount

    Archaeological Mapping

    UAVs are used for mapping within a number of industries, and have already begun to be used in the mapping of archaeological sites. They provide an ideal platform for the creation of DTM (Digital Terrain Model) and DSM (Digital Surface Model) models which can be used in GIS (Geographical Information Systems) applications.

    This is the ideal project for a fixed wing UAV which can be deployed to fly over the area under study with a downward facing camera. The major benefits of such a systems is the stability, the amount of time that they can fly and hence the amount of recording that they can do in one flight.

    Using autopilot systems and software for programming the autopilot, such as Mission Planner, the flight plan for the UAV can be programmed.

    MP-FP-Screen

    Setting out a UAV light pattern in the Mission Planner Software

    Such software has the ability to create a grid flight pattern using the study area selected in the map interface, the altitude flown, the image overlap and the characteristics of the camera being used. Any alteration in the altitude, image overlap or camera specification (such as lens used) will alter the grid pattern to accommodate the alterations.

    Grid

    Setting out a grid UAV flight pattern in the Mission Planner software

    A grid of circular paper targets can be set up on the ground with each target being surveyed in using a GPS (Global Positioning System) which both increased the accuracy of the photogrammetry model and georeferences the results so they can incorporated with other data within a GIS system

    Standing Building Recording

    Photogrammetry has a long history in standing building recording which has be enhanced by the ability of the Total Station to survey points accurately. Limitations of ground based photogrammetry include the ability to record information high above the ground or masked from view. Traditionally this has been solved by using scaffolding, but his is an expensive and time consuming system which can also be dangerous.

    Another option is to use standard building photogrammetric recording techniques to record structures in high detail using a UAV to fly the camera at set heights parallel to the structure. This would mean that high quality imagery could be created using standard methods. The UAV can act as a mobile camera platform/tripod which has the ability to take to camera to heights not easily accessible by other means. Certain points on the building surface would need surveying in using a total station to georeference the 3D model created by the photogrammetry process and to make it more accurate. Orthophotos (geometrically corrected images) can be created from the images taken which are an important element in building recording.

    Increasing development in autonomous flight can be used to automate the flight patterns having the UAV automatically record buildings.

    HDR (High Dynamic Range)

    High Dynamic Range photography is a technique where multiple images are taken with different exposures (bracketing), these are then merged together using computer software to form an image with all of the detail from the images. Many modern digital camera have an auto-exposure bracketing (AEB) setting which allows this to set up on the camera to be done automatically. There are also dedicated HDR cameras. It provides images which are close to what the human eye can see and with more information than standard photographs.

    The problem with using UAVs for this technology is that the images need to be taken while the camera is perfectly still, and even with a camera gimbal a UAV is likely to move slightly between the photographs being taken.

    HDR photographs can also be used in photogrammetry.

    Video

    The video capabilities of most cameras that UAVs carry mean that they can record videos. As we have already seen the ‘Follow-Me’ technology has the potential within archaeology or cultural heritage to record a site tour, filming the tour guide as they walk around site, with a separate digital recording system recording the audio which can later be combined with the video footage in post-production. The Hexo+ UAV Director’s Toolkit allows different filming scenarios such as crane; pan, tilt, crab, dolly, 360° around you, and far-to-close/close-to-far.

    The UAV has the potential to create immersive fly through videos of sites thanks to the recent introduction of multi-camera systems or systems with multi-lens cameras, this can aid in public interaction and interest.

    Archaeological Prospection

    Lidar (Light Detection And Ranging)

    LIDAR is a technology which has already proved useful in Archaeology and Cultural Heritage, it works by firing a pulsed laser beam at the ground and recording the returned beams, the time it takes for the beam to return is recorded and this is used to determine the distance. It is tied to the flight instruments of the light aircraft carrying the LIDAR and accurately records the 3D position and height of the results creating a dense point-cloud of the topography being recorded. The resulting LIDAR point data can be loaded in GIS systems.

    It has the potential to discover archaeological remain under woodland by removing points from the LIDAR point-cloud leaving only the points that hit the ground between the forest cover.

    Although not a cheap technology a number of LIDAR systems have recently been developed which can be carried as a payload on UAV systems. This includes the Phoenix Aerial Systems AL3 S1000 Copter which combines a DJI S1000 Octocopter with their AL3 technology which includes the Velodyne HDL-32 high definition LiDAR sensor.

    AL3 S1000 Copter

    Phoenix Aerial Systme – AL3 S1000 Copter

    If the UAV system recorded high quality photographs as well, these could be recorded in a separate flight using the same flight path, these could be used to overlay the LIDAR data.

    LIDAR can be analysed with a number of computer tools enabling more information to be visualised.

    LiDAR Data with Multiple Hillshades and with Principal Component Analysis (PCA).

    LiDAR Data with Multiple Hillshades and with Principal Component Analysis (PCA).

    Multi-Spectral and Hyper-Spectral Imaging

    Multi-Spectral and Hyper-Spectral imaging involves the recording of the electromagnetic spectrum outside the visible spectrum, this includes the infrared which can detect differences in ground moisture helping to determine what is below the ground level.

    Traditionally this has been done using satellites but spectral imagers are also available for UAV platforms.

    Comparative multispectral imagery of prehistoric field systems near Stonehenge © Historic England.NMR; Source Environment Agency

    Comparative multispectral imagery of prehistoric field systems near Stonehenge © Historic England.NMR; Source Environment Agency

    Ground Penetrating Radar (GPR)

    Ground Penetrating Radar is a technology that is used within field archaeology to discover buried features, it works by recording reflected radio waves that have been transmitted into the ground. GPR can be used on areas such as concrete, stone and tarmac where other geophysical techniques won’t work.

    MSc students from the University of Southampton carrying out a GPR survey in the vicinity of the Episcopio, between Portus and the Isola Sacra, Italy (https://kdstrutt.wordpress.com)

    The potential of having UAVs carry Ground Penetrating Radar recording equipment has already been tested in a number of fields including the detection of IEDs (Improvised Explosive Devices) and mines and the characterization of soil properties. But studies, including one at the University of Leicester, are looking into the potential of GPR carrying UAVs in archaeological recording.

    Bibliography

    Amiri, Amin, Kenneth Tong, and Kevin Chetty. “Feasibility study of multi-frequency Ground Penetrating Radar for rotary UAV platforms.” (2012): 92-92.

    Eisenbeiß, Henri. UAV photogrammetry. Zurich, Switzerland: ETH, 2009. http://www.igp-data.ethz.ch/berichte/Blaue_Berichte_PDF/105.pdf

    Gray, S. UAV Survey: A Guide to Good Practice, 2014. Part 1: http://www.jiscdigitalmedia.ac.uk/infokit/3d/uav-survey Part 2: http://guides.archaeologydataservice.ac.uk/g2gp/AerialPht_UAV

    Jacobs, Axel. “High dynamic range imaging and its application in building research.” Advances in building energy research 1, no. 1 (2007): 177-202.

    Li, Zhe, Yan Li, and Nankai Tian Jin. “Photogrammetric recording of ancient buildings by using unmanned helicopters-cases in China.” International Archives of the Photogrammetry, Remote (2011).

    Michael, Nathan, Shaojie Shen, Kartik Mohta, Yash Mulgaonkar, Vijay Kumar, Keiji Nagatani, Yoshito Okada et al. “Collaborative mapping of an earthquake‐damaged building via ground and aerial robots.” Journal of Field Robotics 29, no. 5 (2012): 832-841.

    Ntregkaa, A., A. Georgopoulosa, and M. Santana Quinterob. “Photogrammetric Exploitation of HDR Images for Cultural Heritage Documentation.” ISPRS Annals of the Photogrammetry, Remote Sensing and Spatial Information Sciences 5 (2013): W1.

    Saleri, Renato, Nocerino Erica, Fabio Remondino, and Fabio Menna. “ACCURACY AND BLOCK DEFORMATION ANALYSIS IN AUTOMATIC UAV AND TERRESTRIAL PHOTOGRAMMETRY-LESSON LEARNT.” In International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences, vol. 2, pp. 203-208. 2013.